Replace Panel Backup Battery
(hold phone sideways for list or scroll for more devices)
1. Insert coin into bottom right corner slot then twist to remove bezel
2. Pry top tabs up gently then fold down front cover taking care to help the wires and antennas connected through the wall
3. Unplug the battery and remove the pack from the plastic retaining clip
4. Battery is a 6 volt 2100 mah battery and is available from LS Security during business hours or from Battery centers in the city. Sask Battery or Battery Depot etc.
Replace Door & Window Contact Batteries
(hold phone sideways for list or scroll for more devices)
Note: Scroll to find applicable sensor
Press end button to remove cover and replace 2 AAA alkaline batteries
Press end latch to remove cover, battery is CR123A or SAFT LS14250 Lithium battery
1. Pull sensor away from backplate then insert screwdriver into side slots to remove cover
2. Slide CR2032 Lithium battery from holder to replace
1.Insert coin into corner slot then twist to remove cover from backplate
2. Remove inside cover then slide CR2032 Lithium battery from holder to replace
Replace Motion Sensor Batteries
(hold phone sideways for list or scroll for more devices)
1. Press top button then remove sensor from back plate
2. Hold top and bottom tabs then pull motion from front cover
2. Remove and replace AA Alkaline batteries then replace motion on back plate
Replace Glass Break Sensor Batteries
(hold phone sideways for list or scroll for more devices)
Remove top cover then remove and replace 2 CR123A Lithium batteries
Open door then remove and replace 2 SAFT LS14500 AA Lithium batteries
Twist sensor counter-clockwise and remove from base. Battery is CR123A Lithium
Replace Carbon Monoxide Batteries
(hold phone sideways for list or scroll for more devices)
1.Press side tabs with screwdriver to remove cover then replace 3 AA Lithium batteries
1.Twist the sensor of the back plate. Remove & replace the battery and align and twist to lock sensor in place again.
Replace Smoke Detector Batteries
(hold phone sideways for list or scroll for more devices)
1.Twist counterclockwise to remove from base, open cover to replace CR123A batteries
1.Twist cover to remove from base, remove and replace 2 9-Volt Alkaline batteries
1.This smoke has no user replaceable battery. If the unit has a fault call LS Security for service (306-522-2752). See the graphic for permanently disabling the device if you are instructed to by a service technician. By turning the switch you are destroying the sensor.
Replace Flood/Freeze Sensor Batteries
(hold phone sideways for list or scroll for more devices)
*** A panel sensor test may be required to clear the low battery trouble or tamper troubles. The next video shows how to do a sensor test ***