User Guide
VOICE CHIME
1. Press 
or 
until System Programming appears. Then press 
2. Enter Master Code **** then press
3. Scroll using until Siren Options then press
4. Scroll using until Voice Chime appears then press
5. Enter 1, 2 or 3 (options below). Or press Disarm for Off. When done press to save
1 = Sensor Name
2 = Loud ding-dong
3 = Soft ding-dong
Off = No sound
6. Press Status several times to exit
CHANGE MASTER CODE
1. Press until System Programming appears then press . Enter the Master Code **** and press
2. Use until Access Codes appears then press
3. Use until Master Code appears and show the current code. Press so the code starts flashing. Type the new 4 digit code. Press and the blinking will stop
4. Press Status several times to exit
1. Press Status and the alarm will speak all troubles with short pause between troubles. When finished it will sound a single beep.
